XPAND Edux 3 3D Glasses DLPÃ‚Â®-LinkÃ¢Â„Â¢ 3D Glasses ... - VIDIMENSIO

XPAND Edux 3 3D Glasses 

DLP®-Link 3D Glasses 

User Guide 

xpand-X103-edux3-manual.indd 1 14.6.2012 10:21:36




User Guide 





What’s Included 

»» 

One (1) pair of XPAND X103-EDUX3 3D Glasses 

»» 

Three (3) Nosepieces 

Compatibility 

A 3D Enabled DLP-Link TV or DLP-Link 3D projector. 3D 

devices with IR or RF synchronization are NOT supported. 

Warranty 

1-year limited product repair / replacement warranty. For detailed 

warranty statement visit 

www.xpand.me 

© XPAND, All Rights Reserved. 5 www.xpand.me 


Functionality 

Glasses Overview 

(1) Button (ON, OFF, Dual View Select, 3D Mode Select) 

(2) LED light 

Turning On/Off Your Glasses 

»» 

Step 1: ON: Press button (1) once 

»» 

Step 2: LED light (2) will ramp from off to bright 

»» 

Step 3: OFF: Press button (1) once 

»» 

Step 4: LED light (2) will ramp from bright to off 

The glasses also automatically turn off if no valid 3D sync is 

detected for 5 minutes. 

Set Your Glasses to Operate in 3D Mode 

Set your 3D device to 3D DLP-Link mode and turn on the 

glasses. When the glasses are in range of your 3D device, they 

will automatically start to operate in 3D mode. 



Some 3D DLP-Link devices may show inverted 3D image when 

used with XPAND X103-EDUX3 glasses. XPAND X103-EDUX3 

glasses support Normal 3D Mode and Inverted 3D Mode. To 

switch between Normal 3D and Inverted 3D operation, press and 

hold the button (1) for 3 seconds. 

When 3 seconds button hold is detected, LED light (2) indicates 

selected 3D Mode: 

Inverted 3D Mode: Five Quick Blinks 

Normal 3D Mode: One Long Blink 

Each time the XPAND X103-EDUX3 glasses are turned ON, they 

start in the same 3D mode as they were in when turned OFF 

(Normal 3D or Inverted 3D). 

Set Your Glasses to Operate in Dual View Mode 

With the selection of Dual View Mode XPAND X103-EDUX3 glasses 

can be used for dual gaming. Dual View Mode can be used during 

normal 3D viewing as well to disable 3D viewing for people that 

face uncomfortable feeling when watching 3D. 

When 3D device is emitting dual view image, double click on the 

button (1) to enter Dual View Mode for player 1. Another double 

click will turn the glasses to Dual View Mode for player 2. The 

next double click will bring the glasses back to 3D viewing mode. 

When double click is detected, LED light (2) indicates the eyewear 

mode: 

Player 1: One Quick Blink 

Player 2: Two Quick Blinks 

3D Mode: One Long Blink for Normal 3D or Five Quick Blinks for 

Inverted 3D 



Each time the XPAND X103-EDUX3 glasses are turned ON, they 

start in 3D Mode (Normal 3D or Inverted 3D). The Dual View Mode 

selection is not stored into the memory. 

Battery Low Indication 

If LED light (2) and shutters flash at power on, battery level is 

low. Glasses will continue to operate normally until the battery is 

completely discharged. 

Battery Replacement 

»» 

Step 1: Open battery compartment 

»» 

Step 2: Take out the battery 

»» 

Step 3: Insert new battery 

»» 

Step 4: Close the battery compartment 

Troubleshooting 

The glasses don’t work: Make sure that the glasses are turned on. 

If problems persist try to turn the ambient lights off or shade the 

windows if intensive sunlight is present. Make sure that your 3D 

device is set to 3D DLP-Link mode. Get closer to the screen. 



Range of the glasses strongly depends on the used 3D device and/ 

or projection screen. 

3D image looks unnatural: Make sure that you have selected the 

correct 3D Mode. Try to change the 3D Mode from Normal 3D 

Mode to Inverted 3D Mode. 

Attention – Consult Accompanying 

Documentation 

Important Safety Instructions 

! Read these instructions. 

! Keep these instructions. 

! Heed all warnings. 

! Follow all instructions. 

! Do not use this apparatus near water. 

! Clean only with dry cloth. 

! Only use the attachments/accessories included 

Battery 

Replace Battery With Type CR2032 Only. Use of Another Battery 

May Present A Risk Of Fire Or Explosion. 

WARNING, Battery May Explode If Mistreated. Do Not Recharge, 

Disassemble, Or Dispose of In Fire. 

Dispose Of Used Battery Promptly. Keep Away From Children. 



Viewers need to refer to the recommendations 

described below 

»» 

Stop watching moving images, if you have any symptoms of: 

headache, dizziness, nausea, malaise and any uncomfortable 

feelings that might be caused by the images. It is advisable 

to take a break for 5 to 15 minutes every hour, even if the 

symptoms are not experienced. 

»» 

Make the viewing conditions comfortable by: 

»» 

Adjusting the illumination, sound and air conditioning. 

»» 

Adjusting the height of the chair and desk to suit your 

physique. 

»» 

Adjusting the brightness, focus or any other parameters of 

your display terminal or operating devices. 

»» 

Guardians are encouraged to protect their children’s health by 

controlling viewing conditions. 

»» 

Avoid unnecessary fatigue caused by overwork or lack of 

sleep, before watching visual products. 

»» 

When watching stereoscopic images, do not incline your head 

relative to the horizontal direction of the images. 

»» 

Stop watching stereoscopic images if you notice double 

images. It is important that display devices be adjusted 

appropriately. 

»» 

The recommendations described in this list may apply to some 

visual products more than others. 



Specifications 

3D Technology: Active Shutter Glasses 

Lens type: LC 

Sync Method: DLP-Link 

Refresh: 96 Hz, 100 Hz, 120 Hz, 124 Hz. 

Battery Life: up to 100 hours 

Battery Type: CR2032 battery, 220mAh 

Temperature: 5 - 45° C 

Weight (3D Glasses): 1.9 oz (56g) 

Lens size: 2.2” diagonal (57mm) 

Dimensions (W x H x D): 6.6” x 1.8” x 6.4” 

For further information go to the XPAND web site at www.xpand. 

me 

XPAND 

1017 Cole Avenue 

Los Angeles, CA 90038 

For technical support, please call 1-888-906-1190 or via email at 

technicalsupport@xpandcinema.com

XPAND Edux 3 3D Glasses DLPÃ‚Â®-LinkÃ¢Â„Â¢ 3D Glasses ... - VIDIMENSIO

Create successful ePaper yourself

Delete template?

Save as template?